DC Brushless Axial Fan 12V 10inch 255mm for Truck Bus WBLF-1001-AS1350-B replace SPAL321

specification of WBLF-1001-AS1350-B replace SPAL321

1,The motor black wire connect the positive,Brown wire connect the negative . clockwise rotation
2,Axial clearance: 0.25mm Max;
3,Pressure test,:660VAC 1S 5mA;
4,Protection:IP68
5,Insulation class:H
6,Insulation resistance:20MΩMIN(500VDC)
7,Operaing temperture:-40-85℃
8,Humidity:0-100°
9,Operaing life:25000 hours Min
10,Vibration :20ms 5G
11,Rated voltage:12VDC Voltage Range:9-16VDC
12,30A Insurance in controller
13,Lead length:500±20mm,A blace∅8 PVCtube length 450
14,Power line model:UL1015 12AWG
15,Weight Approx:3Kg

Features of WBLF-1001-AS1350-B replace SPAL321

Max Fan Speed	4000rpm
Min Fan Speed	1000rpm
Weight	2.0KG
Operating supply voltage rang	9V -16V
Operating working temperature range	-40°C - 85°C
Storage temperature range	-40°C - 120°C
Life time	up to 40000 hours depending on missing profile
Time from 0 rpm to max speed	8 seconds
IP grade	IP68

The drawing of Dimension(mm) of WBLF-1001-AS1350-B replace SPAL321

Airflow of WBLF-1001-AS1350-B replace SPAL321  

The yellow line is Current  &  The blue line is Airflow

PWM control diagram of WBLF-1001-AS1350-B replace SPAL321

Product Picture of WBLF-1251-AS1350-B

Application

12V 10inch Brushless Axial fans is widely used in various models，such as Ambulance, Loader, Construction machinery, Special vehicle, Manure truck, Corn receiver, Excavator, Snow shovel, Bus, Engineering Vehicle, Forestry Machinery, Refrigeration Truck and so on.

Certifations

EMC Certificate

CE certificate

The experimental project :

FAQ:

What is DC Brushless Fan 12V 10inch? 

A brushless DC Axial fan uses brushless DC motors (BLDC motor) that have a cross pattern arrangement of four permanent magnets mounted on the sides of the rotor. Unlike brushed DC motors, BLDC motors do not require any commutator or brushes to operate.

The brushless DC Axial fan is a combination of a powerful BLDC motor, shaft, and fan blades. These fans are durable, reliable, and highly energy efficient. They do not produce sparks in the circuit and operate noiselessly.

The initial torque produced in DC motors is quite high, and hence, brushless DC Axial fans reach their full potential in no time. Their speed can be controlled merely by increasing or decreasing the voltage input.

DC Brushless Axial fan Behaviour 12V 10inch

To understand the cooling behavior of a brushless DC fan, you first need to understand the working of its components. However, you can understand the general behavior of the fan by closely following the voltage drops and rises in the power supply. DC Brushless Axial fans have three voltage variants: 12V, 24V .

Let us try to understand this through a simple example. If a brushless DC brushless Axial fan operates on 12 volts of voltage, then the fan would have an RPM (revolutions per minute) of around 2500. Suppose the voltage now drops to 9 volts, then the RPM of the fan would be reduced to about 1300. Such factors are taken into serious consideration during the testing and R&D of the product to minimize this possibility, that is decreased RPM with less voltage. An efficient DC brushless  Axial fan is quite stable and works well even during power fluctuations.

DC Brushless Axial Fan Types 12V 10inch

In an environment where air flow is not easily generated naturally, air movement by external force is needed for cooling propose. Nowadays, the air movement is commonly generated by cooling fans which can be differ widely by shapes, sizes, functions etc.. Therefore, Cooling fans have typically classified into 4 categories which include Axial Fans, Centrifugal Fans, Centrifugal blowers, Cross Flow Fans.

Fan Accessories 12V 10inch

Sunlight Brushless Axial fans are the result of more than 10 years engineering experience. Sunlight uses advanced modeling software and computer-assisted simulation systems to develop electric motors and blades that optimize a fan’s ability to pull air cleanly through the radiator core.

While many cooling fans are pieced together from many different vendors, Sunlight controls all aspects of its engineering and manufacturing processes from the design and tooling of injection molds to the winding of each electric motor at its ISO 9001 and TS16949-certified facilities.